Route the connection before you choose the hardware
Mounting hardware is not one interchangeable product family. Start with the two parts being connected: a handrail to a wall, a rail to a post, a joint between rail sections, or a bracket that must be set to a project angle. Then confirm the receiving surface, component geometry, final fixing method and installation access. This directory routes those different purchasing tasks to ESANG’s current public product families.
Route my hardware inquiry on WhatsApp
Visible examples from the active families
Choose the active route by connection task
Route — Use it when — Do not decide from the category name alone
Wandmontagebeugels — A handrail or support is fixed from a wall or side surface. — Confirm the actual wall build-up, required clearance, bracket projection, handrail profile and anchor responsibility.
Beugels voor paalmontage — A handrail or rail is supported from a round, square or other post interface. — Match both sides of the bracket: post geometry and the supported rail or handrail.
Verstelbare beugels — The installed position needs a defined height, angle or alignment adjustment. — Specify the adjustment axis, required range, final locked position and access to the locking point.
Rail aansluitingen — Two rail sections must continue straight, turn a corner or meet at a planned transition. — Confirm tube shape, outside and inside dimensions, wall thickness, joint angle, insertion or contact geometry, and fixing method.
Verankeringssystemen — You need to coordinate a component interface with a substrate and a separately selected anchoring design. — This category currently has no direct product-detail listings. It is not evidence that ESANG offers a complete anchor range.
Freeze the interfaces in the right sequence
1. Define the supported component. Record the handrail or rail profile, its dimensions, orientation and whether the visible joint can be welded, mechanically fixed or must remain removable.
2. Define the receiving component. Provide the wall build-up, post cross-section, tube dimensions or adjoining rail section—not only a general label such as “concrete wall” or “round post.”
3. Define position and movement. State clearance, projection, route angle and any installation adjustment. An adjustable part should not be treated as a service hinge unless the selected design explicitly says so.
4. Define the project boundary. The bracket or connector, its fasteners, the anchor system, the substrate and the complete railing assembly have separate responsibilities. The project engineer and relevant manufacturers must close those interfaces.
A useful inquiry can start before every dimension is final
Send a drawing, marked-up photo or simple sketch with the connection task, approximate quantity and environment. Add the known rail, post or wall details. ESANG can then identify the relevant public family and state what still has to be confirmed for the proposed configuration.
Ask the quotation or proposed configuration to state:
• the selected product family and the two interfaces it is intended to join;
• proposed dimensions, material grade and finish rather than an assumed universal fit;
• included bracket or connector parts, loose fasteners and explicit exclusions;
• the installation fixing method and any required welding, drilling or locking operation;
• which load, anchor, substrate and code checks remain with the project team.
Choose between level, raked, and raked-to-level mesh panel geometry by railing run, pattern orientation, interfaces, and project drawings.
Specify handrail sleeves and splice locks by the actual tube interior, required retention and installation access so the connector can fit and be secured.
Zorg ervoor dat verbindingspunten worden voorzien van steunen, overgangen en toegangsmogelijkheden voor montage, zodat de breekpunten voor het transport ook fungeren als gedocumenteerde verbindingen in de geïnstalleerde leuning.
Connect the usable rail path with joint function, supports, movement and transport modules before issuing a continuous handrail specification.
Send coordinated run drawings, substrate details, finish references and scope requirements so surface-mount handrail quotes can be compared meaningfully.
Leg de bestaande ondergrond, de toestand van de randen, de afwerkingen, verborgen leidingen en installaties, de toegankelijkheid, de geometrie en de omvang van de reparatiewerkzaamheden vast voordat met de fabricage voor de aanpassing wordt begonnen.


Foshan ESANG Metal Products onderhoudt met trots CE-certificering (Verificatienummer TD32772401) onder de Richtlijn bouwproducten (Verordening nr. 305/2011), waarmee we onze toewijding aan de hoogste Europese veiligheids- en kwaliteitsnormen bevestigen.
Gecertificeerd Assortiment:
Ons uitgebreide assortiment railingbeslag - inclusief glasklemmen, spanners, beugels, muurbevestigingen, basischoenen, leuningbeslag, kabelbeslag en staanderonderdelen - voldoet aan de volgende eisen EN1906:2012 normen, zodat de structurele integriteit en betrouwbaarheid van de prestaties in alle installaties gewaarborgd zijn.
Wat dit betekent voor je project:
✓ Volledige naleving van regelgeving voor Europese en internationale markten
✓ Onafhankelijk geverifieerde veiligheids- en duurzaamheidsprestaties
✓ Documentatie-ondersteuning voor architecturale specificaties
Gemoedsrust dankzij kwaliteitsgarantie van derden
Certificering geldig tot 2027 | Testrapport: CE-FE24122001-CY

