Route the connection before you choose the hardware
Mounting hardware is not one interchangeable product family. Start with the two parts being connected: a handrail to a wall, a rail to a post, a joint between rail sections, or a bracket that must be set to a project angle. Then confirm the receiving surface, component geometry, final fixing method and installation access. This directory routes those different purchasing tasks to ESANG’s current public product families.
Route my hardware inquiry on WhatsApp
Visible examples from the active families
Choose the active route by connection task
Route — Use it when — Do not decide from the category name alone
حوامل التثبيت على الحائط — A handrail or support is fixed from a wall or side surface. — Confirm the actual wall build-up, required clearance, bracket projection, handrail profile and anchor responsibility.
دعامات التثبيت العمودية — A handrail or rail is supported from a round, square or other post interface. — Match both sides of the bracket: post geometry and the supported rail or handrail.
أقواس قابلة للتعديل — The installed position needs a defined height, angle or alignment adjustment. — Specify the adjustment axis, required range, final locked position and access to the locking point.
موصلات السكك الحديدية — Two rail sections must continue straight, turn a corner or meet at a planned transition. — Confirm tube shape, outside and inside dimensions, wall thickness, joint angle, insertion or contact geometry, and fixing method.
أنظمة التثبيت — You need to coordinate a component interface with a substrate and a separately selected anchoring design. — This category currently has no direct product-detail listings. It is not evidence that ESANG offers a complete anchor range.
Freeze the interfaces in the right sequence
1. Define the supported component. Record the handrail or rail profile, its dimensions, orientation and whether the visible joint can be welded, mechanically fixed or must remain removable.
2. Define the receiving component. Provide the wall build-up, post cross-section, tube dimensions or adjoining rail section—not only a general label such as “concrete wall” or “round post.”
3. Define position and movement. State clearance, projection, route angle and any installation adjustment. An adjustable part should not be treated as a service hinge unless the selected design explicitly says so.
4. Define the project boundary. The bracket or connector, its fasteners, the anchor system, the substrate and the complete railing assembly have separate responsibilities. The project engineer and relevant manufacturers must close those interfaces.
A useful inquiry can start before every dimension is final
Send a drawing, marked-up photo or simple sketch with the connection task, approximate quantity and environment. Add the known rail, post or wall details. ESANG can then identify the relevant public family and state what still has to be confirmed for the proposed configuration.
Ask the quotation or proposed configuration to state:
• the selected product family and the two interfaces it is intended to join;
• proposed dimensions, material grade and finish rather than an assumed universal fit;
• included bracket or connector parts, loose fasteners and explicit exclusions;
• the installation fixing method and any required welding, drilling or locking operation;
• which load, anchor, substrate and code checks remain with the project team.
قارن بين عروض أسعار الدرابزين التي تشمل الأنبوب فقط وتلك التي تشمل حزمة المكونات، وذلك عن طريق الفصل بين الوصلات، والتصنيع، وواجهات التثبيت، وأعمال التشطيب، والكميات المسلّمة.
Compare continuous and sectional handrail supply using delivery access, joint locations, mating details and section identification before fabrication release.
Choose a handrail support change by comparing wall and post interfaces, preserving the gripping path and locating the transition on coordinated drawings.
Choose between level, raked, and raked-to-level mesh panel geometry by railing run, pattern orientation, interfaces, and project drawings.
Specify handrail sleeves and splice locks by the actual tube interior, required retention and installation access so the connector can fit and be secured.
Locate splices with supports, transitions and assembly access so shipping breaks also work as documented connections in the installed handrail.


تفخر شركة فوشان إسانج للمنتجات المعدنية بما يلي شهادة CE (التحقق رقم TD3272772401) بموجب توجيه منتجات البناء (اللائحة رقم 305/2011)، مما يؤكد التزامنا بأعلى معايير السلامة والجودة الأوروبية.
مجموعة المنتجات المعتمدة:
مجموعة تجهيزات الدرابزين الشاملة التي نقدمها - بما في ذلك المشابك الزجاجية وأجهزة الشد والأقواس وحوامل الحائط وأحذية القاعدة وتجهيزات الدرابزين وأجهزة الكابلات ومكونات العمود - تلبي EN1906:2012 المعايير، مما يضمن السلامة الهيكلية وموثوقية الأداء في جميع المنشآت.
ماذا يعني ذلك بالنسبة لمشروعك:
✓ الامتثال التنظيمي الكامل للأسواق الأوروبية والدولية
✓ أداء السلامة والمتانة الذي تم التحقق منه بشكل مستقل
✓ دعم التوثيق للمواصفات المعمارية
✓ راحة البال من ضمان الجودة من طرف ثالث
الشهادة صالحة حتى عام 2027 | تقرير الاختبار: سي-إي 2412122001-سي

