Glass brackets and adapters are useful when the connection does not fit a standard clamp, spigot, standoff or base shoe route. Selection begins with two interfaces: the prepared glass on one side and the wall, post, frame, stringer or fabricated support on the other. Share both sides, even as photos and a hand sketch, and ESANG can propose a connection form for review.
Discuss a bracket or adapter on WhatsApp
Route by the support-side interface
Product route — Connection problem — Information that changes the choice
Glaspaneelsteunen — A discrete bracket must support or locate a panel at a defined point or edge. — Support direction, panel geometry, bracket spacing, glass contact and the receiving structure.
Connectoren van muur tot glas — Glass connects directly to a wall, stringer, fascia or side plate. — Wall build-up, anchor zone, glass hole or clamp detail, offset and tool access.
Glazen montage-adapters — A point fixing or transition piece must bridge glass to a project-specific surface or component. — Both mating interfaces, projection, thread or fastener, tolerance and installation sequence.
Structurele glasbeugels — The project specification assigns a verified structural role to a bracketed connection. — Exact load path, glass and substrate design, bracket spacing and evidence for the proposed item, not the category name alone.
Post naar glas adapters — A glass panel must connect to a round, square, rectangular or fabricated post interface. — Post profile, wall thickness or attachment plate, adapter position, glass preparation and adjacent rail components.
Use photos to identify form, then verify the hidden connection
Define both sides of the connection
Glass interface
State the glass build-up, panel dimensions, edge condition and whether a hole or notch is already fixed. Provide hole diameter, spacing and edge distances from the glass drawing when applicable. Ask the proposal to identify all glass contact parts and the installation torque or setting instruction only when supported for that exact configuration.
Receiving structure
Show the wall material and build-up, post profile, steel plate, stringer or frame that receives the adapter. Include available thickness, anchor zone, cavity or back access and nearby waterproofing or finishes. A wall-side plate that looks suitable in a product photo may still have the wrong hole pattern, projection or anchor access for the site.
Geometry and sequence
Mark the required glass line, offset, bracket elevation and any stair angle or corner transition. Confirm whether the bracket is installed before glass, after finishes or from one accessible side only. Adjustment can solve a defined tolerance; it should not be assumed to compensate for an unknown support position or incorrect glass drilling.
Know when a standard route is simpler
If a panel connects to a regular post face with a conventional clamp, start in Glasklemmen & Connectoren. If it is point-fixed from the side with a defined projection, compare Glass Standoffs. If it is continuously supported from below, start in Systemen voor basisschoenen. Use a project-specific bracket or adapter when those standard load paths do not resolve the actual interface.
Make competing quotes comparable
• Exact connector or bracket drawing, with both glass-side and support-side interfaces identified.
• Proposed glass preparation and every liner, cap, sleeve, washer or contact part included.
• Mounting plate, holes, fasteners and anchors, clearly distinguishing supplied parts from site work.
• Material and finish proposed for the stated exposure; color or appearance in a photo is not a material certificate.
• Adjustment direction and usable range, if adjustment is part of the exact item.
• Quantity, handed or angled variants, packaging, marking and required documents.
Start with the unresolved interface
Send a sketch that labels the glass, support and desired glass line. Add photos, approximate dimensions and quantity even if the final glass holes are not released. ESANG’s response should show a proposed adapter form and identify which dimensions the buyer, glass fabricator, engineer or installer must confirm before manufacture.
Choose between level, raked, and raked-to-level mesh panel geometry by railing run, pattern orientation, interfaces, and project drawings.
Specify handrail sleeves and splice locks by the actual tube interior, required retention and installation access so the connector can fit and be secured.
Zorg ervoor dat verbindingspunten worden voorzien van steunen, overgangen en toegangsmogelijkheden voor montage, zodat de breekpunten voor het transport ook fungeren als gedocumenteerde verbindingen in de geïnstalleerde leuning.
Connect the usable rail path with joint function, supports, movement and transport modules before issuing a continuous handrail specification.
Send coordinated run drawings, substrate details, finish references and scope requirements so surface-mount handrail quotes can be compared meaningfully.
Leg de bestaande ondergrond, de toestand van de randen, de afwerkingen, verborgen leidingen en installaties, de toegankelijkheid, de geometrie en de omvang van de reparatiewerkzaamheden vast voordat met de fabricage voor de aanpassing wordt begonnen.


Foshan ESANG Metal Products onderhoudt met trots CE-certificering (Verificatienummer TD32772401) onder de Richtlijn bouwproducten (Verordening nr. 305/2011), waarmee we onze toewijding aan de hoogste Europese veiligheids- en kwaliteitsnormen bevestigen.
Gecertificeerd Assortiment:
Ons uitgebreide assortiment railingbeslag - inclusief glasklemmen, spanners, beugels, muurbevestigingen, basischoenen, leuningbeslag, kabelbeslag en staanderonderdelen - voldoet aan de volgende eisen EN1906:2012 normen, zodat de structurele integriteit en betrouwbaarheid van de prestaties in alle installaties gewaarborgd zijn.
Wat dit betekent voor je project:
✓ Volledige naleving van regelgeving voor Europese en internationale markten
✓ Onafhankelijk geverifieerde veiligheids- en duurzaamheidsprestaties
✓ Documentatie-ondersteuning voor architecturale specificaties
Gemoedsrust dankzij kwaliteitsgarantie van derden
Certificering geldig tot 2027 | Testrapport: CE-FE24122001-CY

