壁挂式扶手

壁挂式扶手

Use this category when the handrail will be carried by a wall or another vertical support. The purchasing decision is not simply round versus square tube: the wall build-up, bracket interface, projection, gripping clearance, rail route and end condition must be compatible. Start with a photo or drawing even if final dimensions are not ready.

Discuss wall-mount handrails on WhatsApp

Route to the right product family

• Stainless Steel Wall Handrails — the broad starting point for a wall-supported rail when tube, bracket, return and finish need to be specified together.

• Round Tube Handrail Systems — use when the design calls for a round gripping profile; match tube diameter to the saddle, connector and end detail.

• Square Tube Handrail Systems — use when a square or rectangular visual line is required; confirm edge treatment, flat support head, corners and terminations.

• Adjustable Wall Handrail Brackets — use when the route is sloped or the bracket head needs a defined field setting. State the required movement and final locking condition rather than assuming universal adjustment.

• Continuous Wall Handrail Systems — use for routes with multiple sections, landings, corners or returns where joint placement and grip continuity must be planned.

• Heavy Duty Wall Handrails — use when the project calls for a higher-duty support condition. “Heavy duty” is not a load rating; provide the required loads, wall construction and bracket/anchor criteria for review.

• ADA Compliant Wall Handrails — use as the route for a U.S. accessibility-oriented specification. Provide the governing dimensions and project requirements; the category name does not certify the complete installed work.

Five decisions that prevent a mismatched order

1. Identify what is behind the finish

Tile, plasterboard, stone cladding or another visible finish does not tell the supplier what carries the bracket. Show the structural wall or backing, finish build-up and any drilling restrictions. The quotation should state whether anchors are included, excluded or subject to confirmation; anchors for an unknown substrate should not be assumed.

2. Match the bracket to the rail

Provide the rail cross-section and the intended bracket contact: round saddle, flat plate or another connection. Confirm bracket projection, wall-side footprint, visible fastener preference and whether adjustment is required. A bracket that fits the wall may still mismatch the tube.

3. Map the full route

Mark straight lengths, slopes, landings, inside or outside corners, joints and terminations. State whether ends return to the wall, close with caps or connect to another support. This determines the connector types, cut lengths and installation sequence.

4. Separate appearance from performance

Finish, tube profile and concealed joints affect appearance. Bracket layout, wall support, anchors and the complete installed assembly affect structural performance. Do not compare two quotes only by visible tube and finish; compare the proposed interfaces and exclusions as well.

5. Treat accessibility as a project requirement

If the rail must follow an accessibility standard or local code, supply the applicable jurisdiction, drawing dimensions, clearance, height, return and continuity requirements. ESANG’s proposal should identify what it is manufacturing to those inputs; final compliance remains a property of the complete installed route.

一份可比报价应包含哪些内容

Ask for the offered rail profile and section lengths; material grade and finish; fixed or adjustable bracket model/geometry; bracket quantity or spacing basis; straight, angle and return components; joining method; end condition; supplied fasteners or stated exclusions; fabrication state; packaging; and any information still needed before production. This makes a component-only offer distinguishable from a fabricated rail set.

Minimum information to start

Send the route length and shape, wall construction or best available site photos, rail profile preference, target projection or clearance, end-return concept, indoor/outdoor exposure, quantity, destination and drawings if available. Preliminary information is enough to open the discussion; interface dimensions and project criteria must be frozen before manufacture.

Send your wall-handrail requirements

相关职位:

埃桑的项目

埃桑证书

佛山伊桑金属制品有限公司自豪地保持着 CE 认证 (根据《建筑产品指令》(第 305/2011 号法规),我们获得了 TD32772401 认证(认证编号:TD32772401),这肯定了我们对欧洲最高安全和质量标准的承诺。

认证产品范围:
我们全面的栏杆配件组合--包括玻璃夹、张紧器、托架、墙面安装件、底座、扶手配件、电缆五金件和立柱组件--符合以下要求 EN1906:2012 标准,确保所有装置的结构完整性和性能可靠性。.

这对您的项目意味着什么?

  • ✓ 完全符合欧洲和国际市场的法规要求

  • ✓ 经独立验证的安全和耐用性能

  • ✓ 为架构规范提供文档支持

  • ✓ 由第三方提供质量保证,让您高枕无忧

认证有效期至 2027 年 | 测试报告:CE-FE24122001-CY

埃桑的项目

立即联系我们 !