电缆硬件和配件

ESANG cable hardware fittings are used to connect, route, assemble, and support stainless steel cable railing systems. These fittings work with cable, posts, tensioners, terminals, through-post hardware, and surface-mounted components to create complete cable infill railing assemblies.

本类别包括 Stainless Steel Cable Fittings, Swageless Cable Assemblies, Through Post Cable Fittings, Surface Mount Cable Hardware, ，以及 Cable Assembly Hardware Kits.

For contractors, distributors, fabricators, and project buyers, cable hardware selection should consider cable diameter, post type, terminal condition, tensioning method, pass-through routing, surface mounting, material grade, finish, and project environment. ESANG can supply and manufacture cable railing fittings according to drawings, dimensions, cable size, material grade, finish requirements, and installation conditions.

Cable Hardware Fitting Options

Fitting option	最适合用于	关键筛选问题
Stainless Steel Cable Fittings	General cable railing assemblies, outdoor railings, decks, balconies, and marine-oriented projects	What cable size, material grade, fitting type, and installation environment are required?
Swageless Cable Assemblies	Projects where on-site assembly or simplified cable fitting installation is preferred	What cable diameter, assembly method, tensioning approach, and installer capability should be considered?
Through Post Cable Fittings	Cable runs passing through intermediate posts, terminal posts, or straight railing sections	What post type, hole position, cable direction, and pass-through protection are required?
Surface Mount Cable Hardware	Cable systems mounted to posts, walls, frames, or surfaces without passing through the post body	What mounting surface, fixing method, cable angle, and fitting position are needed?
Cable Assembly Hardware Kits	Projects that need coordinated fittings, terminals, tensioning parts, and installation hardware	What railing layout, cable length, post type, and hardware combination should be included?

How to Choose Cable Hardware Fittings

Cable hardware fittings should be selected according to how the cable starts, passes through the railing, changes direction, tensions, and ends. The correct fitting set depends on the post layout and cable routing plan.

项目状况	建议方向	为何这很重要
The cable passes through posts	Use through post cable fittings or pass-through hardware	Pass-through details help protect cable, maintain alignment, and improve installation quality.
The cable attaches to the surface of a post or wall	Use surface mount cable hardware	Surface mounting changes the fixing method, cable angle, and visible hardware position.
The project needs on-site cable assembly	Use swageless cable assemblies where suitable	Swageless hardware can reduce dependence on traditional swaging equipment.
The project needs a coordinated hardware package	Use cable assembly hardware kits	Kits help match cable fittings, terminals, tensioners, and related components for a defined layout.
该项目位于户外、沿海、泳池畔或潮湿环境中	Consider 316 stainless steel cable fittings and suitable maintenance requirements	在潮湿或接触氯化物的环境中，耐腐蚀性尤为重要。.
The system includes corners or stair runs	Review cable direction, tensioning points, terminal posts, and fitting angles together	Corner and stair conditions often require different fitting layouts from straight runs.

Swaged, Swageless, Through-Post, and Surface-Mount Differences

Cable hardware fittings should be divided by function. Some fittings terminate the cable, some tension the cable, some allow pass-through routing, and some attach the cable to a surface.

Fitting type	主要功能	常见注意事项
Swaged fittings	Attach fittings to cable by mechanical compression or factory preparation	Cable diameter, terminal style, swaging method, finished cable length
Swageless fittings	Allow cable assembly without traditional swaging equipment	Cable compatibility, assembly sequence, installer experience, tensioning method
Through-post fittings	Guide or protect cable where it passes through a post	Post shape, hole diameter, cable direction, pass-through alignment
Surface-mount fittings	Attach cable hardware to a post, wall, frame, or mounting surface	Fixing method, cable angle, surface strength, visible hardware layout
Hardware kits	Group related fittings for a complete cable assembly or project section	Layout, cable length, number of runs, post type, terminal and tensioning requirements

Cable Layout and Post Compatibility

Cable hardware fittings must be selected with the post layout. A straight railing run, a stair railing, a corner condition, and a deck railing may require different fitting combinations.

Layout factor	需要确认的内容	相关五金件
Post type	Round, square, rectangular, terminal, intermediate, or corner posts	Through-post fittings, surface mount hardware, terminal fittings
电缆走向	Straight run, angled run, stair run, or corner turn	Pass-through fittings, multi-angle fittings, cable end fittings, tensioners
Terminal condition	Where the cable starts, ends, tensions, or changes direction	Cable end fittings, tensioners, turnbuckles, terminal post hardware
Post holes	Hole diameter, hole position, hole spacing, and finish around holes	Through-post hardware, pass-through fittings, drilled posts
Cable length	Finished cable length, adjustment range, and installation sequence	Swaged terminals, swageless assemblies, tensioning fittings

材料、表面处理及定制生产

ESANG cable hardware fittings can be supplied or manufactured according to project requirements, including cable diameter, fitting type, thread detail, terminal style, pass-through design, surface mounting detail, material grade, surface finish, and packaging requirements.

材质或表面处理	典型应用	说明
304 不锈钢	室内缆索栏杆系统、商业室内空间、住宅楼梯以及干燥环境	A common option for many indoor railing projects.
316 不锈钢	户外缆绳栏杆、沿海项目、泳池畔区域、露台、平台以及潮湿环境	通常在需要更强耐腐蚀性的情况下优先选用。.
316L 不锈钢	需要提高可焊性或对耐腐蚀性能要求更高的项目	适用于规范要求使用低碳不锈钢的情况。.
拉丝或缎面处理	商用钢缆栏杆、露台、阳台以及大多数建筑钢缆栏杆项目	有助于减少轻微使用痕迹和指纹的可见度。.
镜面抛光	装饰用途或精选高端应用	外观更亮丽，但需要更细心的操作和清洁。.

For non-standard cable railing projects, customers can provide drawings, cable diameter, post type, hole layout, terminal condition, surface mounting details, finish requirements, and project environment. ESANG can review the requirements and manufacture cable hardware fittings to match the project specification where feasible.

与缆绳栏杆组件的兼容性

Cable hardware fittings should be selected together with tensioners, end fittings, posts, handrails, and spacer bars. A complete cable railing layout usually combines several component types.

For cable tension adjustment, coordinate fittings with 张紧器和调紧器.
For cable termination, coordinate fittings with 电缆终端配件.
For cable passing through posts, review 通柱硬件 and post hole layout.
关于立柱之间的间距支撑，请参阅电缆撑杆.
For post-supported cable railing systems, coordinate with 不锈钢柱 and post hardware.
For handrail or top rail integration, coordinate with 柱式安装扶手 or top rail components.

根据项目需求进行定制

Many cable hardware fitting projects are customized according to cable diameter, post layout, cable routing, terminal method, material grade, and installation environment. ESANG can support custom stainless steel cable fittings, swageless cable assemblies, through-post cable fittings, surface mount cable hardware, and cable assembly hardware kits.

When a project has standard-oriented requirements related to guardrail height, cable spacing, opening limitations, material grade, corrosion resistance, or installation method, customers should provide the required drawings and specifications. ESANG can manufacture cable railing fittings to match those provided details, while final compliance depends on the complete installed system, structural design, installation method, and applicable local code.

安装与项目注意事项

Cable hardware fittings should be reviewed as part of the complete cable railing system. Cable diameter, post layout, terminal condition, tensioning method, and installation sequence should be confirmed before production or ordering.

电缆直径与电缆结构
Swaged or swageless assembly method
立柱类型、立柱间距和孔位布局
Through-post, surface mount, or terminal connection method
张紧器位置和调节范围
End fitting style and terminal post condition
Corner routing and stair angle requirements
适用于室内、室外、沿海或泳池畔环境的材料等级
当地建筑规范及项目技术规范要求

For decks, balconies, stairs, terraces, and public-access projects, the complete cable railing system should be reviewed by the project designer, engineer, contractor, or local authority. ESANG can manufacture cable fittings to match provided requirements, but final compliance depends on the complete installed assembly and site conditions.

应用场景

露台和阳台的缆绳栏杆

Cable hardware fittings are commonly used in deck and terrace railing systems where open views and horizontal cable lines are required. Outdoor projects should consider 316 stainless steel, fasteners, finish, and maintenance.

阳台缆索栏杆系统

Balcony cable railing systems may require cable fittings, terminal hardware, tensioners, through-post hardware, and stainless steel posts. Cable layout and post role should be confirmed together.

楼梯钢缆栏杆

Stair cable railing projects require careful attention to cable angle, post hole layout, tensioning points, terminal conditions, and handrail connection details.

Indoor Cable Railing Systems

Indoor cable railings are commonly used for modern stairways, lofts, offices, and residential interiors. 304 stainless steel may be suitable for many dry indoor projects.

户外及沿海电缆栏杆

Outdoor, coastal, poolside, and humid environments require more attention to corrosion resistance, cleaning, and hardware selection. 316 or 316L stainless steel may be considered for more demanding exposure conditions.

常见问题

What are cable hardware fittings used for?

钢缆五金件用于连接、布线、端部固定、组装和支撑不锈钢钢缆栏杆系统。它们可与钢缆、立柱、张紧器、端部配件、穿柱式五金件以及扶手配合使用。.

电缆接头和电缆张紧器有什么区别？

电缆接头是一大类用于组装、布线、穿线、表面安装和终端处理的五金件。电缆张力调节器专门用于调节和维持电缆张力。根据设计不同，某些产品可能同时具备接头和张力调节功能。.

什么是无压接式线缆组件？

无压接电缆组件是一种专为无需传统压接设备即可进行组装而设计的电缆硬件系统。当项目需要现场组装或简化安装时，此类组件非常实用，但应确认电缆的兼容性及安装顺序。.

何时应使用穿孔式电缆接头？

当电缆穿过立柱时，应使用穿柱式电缆接头。它们有助于保护电缆、改善对齐，并在中间立柱或特定终端立柱布局中形成更整洁的穿线细节。.

何时应使用表面安装式电缆紧固件？

当电缆需要固定在立柱、墙壁、框架或结构支撑件的表面上，而非穿过立柱时，应使用表面安装式电缆固定件。应确认安装表面的强度、固定方式以及电缆的倾斜角度。.

线缆组件硬件套件包含哪些内容？

电缆组件硬件套件可能包含用于特定电缆栏杆布局的配套接头、端子、张紧件、穿线件或相关硬件。应根据项目图纸和电缆布线要求选择具体的套件。.

ESANG 能否定制电缆硬件配件？

是的。ESANG 能够根据电缆直径、接头类型、螺纹规格、端子状态、接线柱布局、材料等级、表面处理以及包装要求，生产相应的电缆接头。.

我应该选择304还是316不锈钢电缆接头？

304不锈钢通常用于室内和干燥环境。316不锈钢通常更适合用于室外、沿海、泳池边、潮湿或腐蚀性较强的环境。最终应根据项目的使用环境和技术规范选择合适的等级。.

进行电缆配件询价需要提供哪些信息？

有用的信息包括电缆直径、接头类型、立柱类型、立柱间距、电缆布置、端子状况、张力要求、材料等级、表面处理、数量、图纸以及项目环境。.

不锈钢缆索五金件应如何维护？

日常清洁通常使用温和的清洁剂、清水和软布。请避免使用含氯清洁剂、钢丝球和研磨工具。安装在户外、泳池边及沿海地区的设备应更频繁地进行清洁，以减少表面污染并保持外观。.

埃桑的项目

埃桑证书

佛山伊桑金属制品有限公司自豪地保持着 CE 认证 (根据《建筑产品指令》（第 305/2011 号法规），我们获得了 TD32772401 认证（认证编号：TD32772401），这肯定了我们对欧洲最高安全和质量标准的承诺。

认证产品范围：
我们全面的栏杆配件组合--包括玻璃夹、张紧器、托架、墙面安装件、底座、扶手配件、电缆五金件和立柱组件--符合以下要求 EN1906:2012 标准，确保所有装置的结构完整性和性能可靠性。.

这对您的项目意味着什么？

✓ 完全符合欧洲和国际市场的法规要求
✓ 经独立验证的安全和耐用性能
✓ 为架构规范提供文档支持
✓ 由第三方提供质量保证，让您高枕无忧

认证有效期至 2027 年 | 测试报告：CE-FE24122001-CY

电缆硬件和配件