Match the post side and the rail side as one connection
A post-mount bracket has two interfaces: the post or clamp side and the supported handrail or rail side. Choosing only by post shape can still leave the wrong saddle, rail orientation or fixing method. Use the current product routes below to define the connection, then place the exact post section, rail profile, angle and included fasteners on the proposed drawing.
Discuss post-bracket options on WhatsApp
Two visible interface forms
Five current product routes
Supports de fixation pour poteaux ronds
Use when the post-side interface must fit a curved post surface. Provide the actual post outside diameter and wall condition as well as the supported rail profile.
Supports de fixation pour poteaux carrés
Use for a flat post face, including a square or separately confirmed rectangular section. Record face orientation, post size and where the rail axis sits relative to the post.
Use when the rail support needs a defined adjustment at the post. Confirm the adjustment axis and range, the final locking detail and whether installation access remains available.
Supports de poteaux multi-angles
Use for a route with planned non-straight or changing directions. Supply the actual plan and elevation angles; the product name does not prove unlimited axes or angle range.
Supports de fixation pour poteaux
Use when a clamp-style post connection is being considered instead of a welded or plate-fixed interface. Match post shape, contact surfaces, tightening access and protection of the finished post.
Define fit before finish
Interface — Minimum buyer input — Mismatch to avoid
Post — Cross-section, outside dimensions, wall thickness or backing, face orientation and fabrication state — A curved seat on a flat face, a flat plate on the wrong post face, or a fixing that cannot reach suitable structure.
Rail or handrail — Profile, outside and relevant inside dimensions, route direction and desired contact/saddle form — A visually similar bracket head that does not seat on or align with the actual rail.
Connection method — Welded, drilled/mechanical, clamped or another project-defined method — Buying a component that needs fabrication or access the installer cannot provide.
Angle and position — Plan/elevation angles, rail axis, height and any field adjustment required — Treating an adjustable joint as universal or omitting the final locked position.
Adjacent infill — Glass, cable, bar, panel or open-zone locations near the bracket — Collisions with clamps, cable holes, tensioning hardware or edge clearances.
Exposure — Location, moisture/chloride or chemical exposure, finish requirement and cleaning regime — Assuming a photographed surface or category name proves a suitable material/finish.
Bracket fit is not whole-system approval
The post, bracket, rail, fasteners, nearby infill and base connection act together. A bracket photo cannot establish post capacity, rail capacity or the performance of the installed railing. The project team should confirm the design actions, post and rail fabrication, bracket spacing, fastener detailing and applicable requirements for the complete assembly.
If welding is proposed, ask who supplies the final weld preparation and finish restoration. If a clamp or mechanical fixing is proposed, ask for contact geometry, included pads or fasteners, tightening access and any inspection requirement to be shown on the proposed configuration.
Ask for a quotation you can compare
• exact post-side and rail-side geometry, not only “round” or “square”;
• fixed, adjustable, multi-angle or clamp connection and its final locking/fixing method;
• proposed material grade, finish and visible surface direction;
• included bracket pieces, pads and loose fasteners, plus explicit exclusions;
• fabrication or site work required before installation;
• dimensions and project decisions still open before production.
A photo with two or three marked dimensions is enough to start route selection. A production-ready match still needs the final post and rail data.
Distinguish handrail returns, end caps and unresolved end interfaces, then schedule each termination by function, adjoining construction and supply responsibility.
Choose factory-cut or site-trimmed handrails by checking dimension status, datums, mating allowances and the finish work attached to each cut.
Compare tube-only and component-package handrail quotes by separating fittings, fabrication, mounting interfaces, finish work and delivered quantities.
Compare continuous and sectional handrail supply using delivery access, joint locations, mating details and section identification before fabrication release.
Choose a handrail support change by comparing wall and post interfaces, preserving the gripping path and locating the transition on coordinated drawings.
Choisissez entre une géométrie de panneaux grillagés « à niveau », « inclinés » ou « inclinés puis ramenés à niveau » en fonction du tracé de la balustrade, de l'orientation du motif, des interfaces et des plans du projet.


Foshan ESANG Metal Products est fier d'entretenir Certification CE (numéro de vérification TD32772401) en vertu de la directive sur les produits de construction (règlement n° 305/2011), ce qui confirme notre engagement à respecter les normes européennes les plus strictes en matière de sécurité et de qualité.
Certifié Gamme de produits :
Notre gamme complète d'accessoires pour garde-corps, qui comprend des pinces à verre, des tendeurs, des supports, des supports muraux, des sabots, des accessoires pour mains courantes, des câbles et des composants pour poteaux, répond aux besoins des utilisateurs de garde-corps. EN1906:2012 garantissant l'intégrité structurelle et la fiabilité des performances dans toutes les installations.
Ce que cela signifie pour votre projet :
✓ Conformité réglementaire totale pour les marchés européens et internationaux
✓ Performances en matière de sécurité et de durabilité vérifiées de manière indépendante
✓ Support documentaire pour les spécifications architecturales
✓ Tranquillité d'esprit grâce à l'assurance qualité d'une tierce partie
Certification valable jusqu'en 2027 : CE-FE24122001-CY

