Mains courantes

Mains courantes

Use this category when the main procurement problem is carrying a consistent handrail route through straight runs, slopes, landings, turns or returns. “Continuous” describes the intended gripping path and coordinated transitions; it does not automatically mean one piece, an invisible joint or a compliant installed route. Begin with the full path, then choose sections and connections.

Discuss a continuous handrail route on WhatsApp

Route to the right product family

• Tube pour main courante ronde continue — start here when the route uses a round gripping profile. Confirm tube diameter, feasible section lengths, supports, connectors, bends and returns.

• Raccords de main courante sans joint — use when the purchasing priority is a smooth-looking, aligned transition. “Seamless” is an appearance/feel objective; the proposed quote must state the actual joint and fixing method.

• Systèmes de mains courantes à grande portée — use when reducing joints or covering long routes is important. Confirm transport, packing, site access, handling and installation limits before fixing section lengths.

• Kits de montage pour mains courantes soudées — use when workshop or site welding is the intended fabrication route. Define supplied parts, fit-up, welding responsibility, finish restoration and inspection; the word “kit” does not guarantee a complete installation package.

Plan the route before ordering components

Break the path into buildable sections

Mark every straight run, slope, landing, turn, return and termination. Add maximum shipping or site-access lengths and identify where a joint can be assembled and inspected. A longer piece may reduce joints but increase freight, handling and installation difficulty.

Choose the connection strategy

State whether the project prefers mechanical joiners, visible fittings, concealed sleeves, formed bends or welded and refinished joints. These routes differ in field tolerance, access, appearance, fabrication responsibility and potential for later disassembly. Ask the quotation to name the proposed method rather than using “seamless” alone.

Coordinate supports and joints

Identify wall brackets, post supports or mixed support conditions and their planned locations. Do not assume a joint may be placed anywhere: the rail profile, connector engagement, bracket layout and project criteria must be reviewed together.

Define changes of direction and ends

Provide actual plan and elevation angles where possible. Distinguish elbows, adjustable connectors, custom bends and returns to wall, post or floor. A nominal corner label should not replace the project geometry.

Protect the finish through fabrication

State the requested material grade and finish, and whether fabrication occurs before delivery or on site. For welded work, include responsibility for welding procedure, distortion control, cleanup and finish restoration in the comparison. A polished photo does not prove how an installed joint will be completed.

Continuity and compliance are assembly outcomes

If a project has accessibility, building-code or other standard-oriented requirements, provide the applicable route dimensions, grip profile, height, clearance, extensions/returns and continuity rules. ESANG’s proposal should state the components or fabricated sections offered to those inputs. Final compliance depends on the complete installed route, supports, substrate and site work.

What to compare in quotations

Compare rail profile and section lengths; straight, angle and return components; exact joint method; support interfaces; fabrication and finish state; material grade and finish offered; included fasteners; packing and shipping splits; field-work responsibilities; quantities; and explicit exclusions. This distinguishes loose connectors from prepared sections or a broader route package.

Minimum information to start

Send a dimensioned or marked-up route, total length, stair/ramp/landing geometry, desired rail profile, preferred joint appearance, support type and locations, maximum transport/site-access length, finish, environment, quantity and destination. Early estimates can start the discussion; joint locations and interfaces must be confirmed before production.

Send your continuous-route requirements

Articles connexes :

Projets d'Esang

Certificat d'Esang

Foshan ESANG Metal Products est fier d'entretenir Certification CE (numéro de vérification TD32772401) en vertu de la directive sur les produits de construction (règlement n° 305/2011), ce qui confirme notre engagement à respecter les normes européennes les plus strictes en matière de sécurité et de qualité.

Certifié Gamme de produits :
Notre gamme complète d'accessoires pour garde-corps, qui comprend des pinces à verre, des tendeurs, des supports, des supports muraux, des sabots, des accessoires pour mains courantes, des câbles et des composants pour poteaux, répond aux besoins des utilisateurs de garde-corps. EN1906:2012 garantissant l'intégrité structurelle et la fiabilité des performances dans toutes les installations.

Ce que cela signifie pour votre projet :

  • ✓ Conformité réglementaire totale pour les marchés européens et internationaux

  • ✓ Performances en matière de sécurité et de durabilité vérifiées de manière indépendante

  • ✓ Support documentaire pour les spécifications architecturales

  • ✓ Tranquillité d'esprit grâce à l'assurance qualité d'une tierce partie

Certification valable jusqu'en 2027 : CE-FE24122001-CY

Projets d'Esang

Contactez-nous dès maintenant !