A cable railing purchase is not just a choice of visible fitting. The run has to work from one terminal to the other: cable construction, a fixed or receiving end, an accessible tensioning end, intermediate post passages, any spacer bars, and every stair or corner condition must be resolved together. Use this directory to route each part of that decision, then ask ESANG to state the proposed supply scope in the quotation.
Discuss a Cable Railing System on WhatsApp
Route the Purchase to the Right Hardware Family
These five category routes divide the current public cable-railing range by function. They are not five interchangeable names for the same part.
• Accesorios para cables — start here when the immediate decision is the cable-side assembly method, the post-side connection, or the boundary of a proposed hardware kit.
• Tensores y tensores — use this route when a cable run needs a defined adjustment point, take-up access, or an angle-capable tensioning connection.
• Terminales de cable — compare threaded, swaged, ball, fork, eye and stop-style terminal interfaces by the part they must mate with.
• Barras separadoras de cables — use this route for intermediate row-position support between structural posts; a spacer is not automatically a terminal or tensioner.
• Herrajes pasantes — use this route for straight pass-through holes, cable-hole finishing and protection, terminal-post passages, or a separately reviewed corner route.
The directory title does not by itself confirm that cable, posts, anchors, tools or every visible accessory are included. A comparable quotation should identify every proposed line item and clearly mark buyer-supplied or site-supplied items.
Map the Cable Run Before Selecting Parts
1. Define the two ends
State which end is intended to provide adjustment and what the opposite end must do. A terminal can be fixed, retaining, articulated or tensionable depending on its design. Do not assume that every threaded fitting is a tensioner or that every end stop can take the role of a terminal-post assembly.
2. Classify every post
Mark posts as terminal, intermediate, corner or stair posts on the elevation. Intermediate posts may only guide a cable; terminal posts receive the end load and the tensioning arrangement; corner posts introduce a change of direction that must be designed rather than inferred from a straight-hole detail.
3. Decide through-post or surface connection
A through-post layout needs coordinated hole position, hole size, post wall or section, cable exit direction and access for the fitting. A surface-mounted layout instead needs a defined face geometry, mounting fastener or threaded receiver, articulation and clearance. The two approaches affect post fabrication and cannot be swapped late without rechecking the drawing.
4. Add intermediate support only where it has a defined role
Spacer bars can keep several cable rows in a planned pattern between posts. They do not replace the structural post, the cable terminal, or the tensioner. Overall spacer length, row positions, cable passages and the spacer’s own fixing method belong in the inquiry.
Visible Component Forms, Not a Complete Supply Promise
Corner and Stair Conditions Need Their Own Decision
A straight horizontal run, an inclined stair run and a corner run do not share the same alignment. At a stair, the end fitting must meet the cable axis without unintended side loading. At a corner, the drawing should say whether each direction terminates and restarts, or whether an angle-specific route is intended. Do not treat a cable pulled through one sharp, unreviewed hole as an automatic corner solution.
Information That Starts a Useful Inquiry
A marked-up elevation, sketch or site photo is enough to start. Add what is already known and leave unknown fields visibly open:
• overall railing layout, straight lengths, stair pitch and corner locations;
• number of cable rows, intended row positions, and the project’s opening or spacing requirement;
• requested cable diameter and construction, or a request for ESANG to propose them for review;
• post profile, outside size, wall or section detail, hole layout and material;
• preferred through-post or surface-mounted connection;
• which end should be accessible for tension adjustment;
• indoor, outdoor, coastal, poolside or other exposure description;
• quantity by run or by component, finish requirement and destination.
Fields to Compare in the Quotation
• proposed cable diameter and construction, and whether cable is included;
• fixed-end and tensioning-end part descriptions for each run type;
• swaged, mechanical or other cable-side preparation and any required tool;
• post-side interface, thread, hole, washer, nut, receiver or mounting-fastener detail;
• adjustment travel, installation clearance and accessible tensioning location;
• intermediate pass-through, spacer and corner-routing details;
• proposed material grade and finish, with the requested material evidence;
• included components, exclusions, packing unit and quantity basis.
Final guard performance, post strength, anchorage, cable spacing and code compliance belong to the complete installed system and project design. A component photo or category name is not evidence of those outcomes.
Compara los presupuestos de barandillas que incluyen solo tubos y los que incluyen el paquete de componentes, desglosando los accesorios, la fabricación, los elementos de fijación, los acabados y las cantidades suministradas.
Compara el suministro de barandillas continuas y seccionales teniendo en cuenta el acceso para la entrega, la ubicación de las uniones, los detalles de acoplamiento y la identificación de las secciones antes de dar luz verde a la fabricación.
Elige un cambio en el soporte del pasamanos comparando las uniones entre la pared y el poste, manteniendo la trayectoria de sujeción y situando la transición en los planos coordinados.
Elige entre la geometría de paneles de malla «nivelada», «inclinada» o «de inclinada a nivelada» en función del tramo de barandilla, la orientación del patrón, las interfaces y los planos del proyecto.
Especifique los manguitos para pasamanos y los cierres de empalme en función del diámetro interior real del tubo, la retención necesaria y el acceso para la instalación, de modo que el conector pueda encajar y fijarse correctamente.
Localiza los empalmes con soportes, transiciones y accesos de montaje, de modo que las separaciones de transporte también funcionen como uniones documentadas en el pasamanos instalado.


Foshan ESANG Metal Products se enorgullece de mantener Certificación CE (Verificación n.º TD32772401) en virtud de la Directiva sobre productos de construcción (Reglamento n.º 305/2011), lo que afirma nuestro compromiso con los más altos estándares europeos de seguridad y calidad.
Gama de productos certificados:
Nuestra amplia gama de herrajes para barandillas, que incluye abrazaderas de vidrio, tensores, soportes, soportes de pared, zapatas, herrajes para pasamanos, herrajes para cables y componentes para postes, satisface los requisitos más exigentes. EN1906:2012 garantizando la integridad estructural y la fiabilidad del rendimiento en todas las instalaciones.
Qué significa esto para su proyecto:
✓ Cumplimiento total de la normativa para los mercados europeos e internacionales
✓ Rendimiento de seguridad y durabilidad verificado de forma independiente.
✓ Soporte de documentación para las especificaciones arquitectónicas
✓ Tranquilidad gracias a la garantía de calidad de terceros
Certificación válida hasta 2027 | Informe de pruebas: CE-FE24122001-CY

