Barras espaçadoras de cabos

Barras espaçadoras de cabos

Cable spacer bars sit between structural posts to organize several cable rows and help hold their planned positions. They are an intermediate support component—not automatically a terminal post, a tensioner, or a substitute for the railing frame. Select a spacer from the row layout, cable passage and mounting detail shown on the project drawing.

Discuss Cable Spacer Bars on WhatsApp

Use the Product Routes as Inquiry Starting Points

• Intermediate Cable Spacers — start here for a spacer located between two structural posts. Provide row positions, overall length, cable passage and attachment detail.

• Adjustable Cable Spacer Systems — use this route only when the drawing needs a defined field adjustment. Ask the proposal to identify what moves, the permitted range and how the position is locked.

• Extended Length Spacers — use the route name to request a project-specific overall length; “extended” is not a dimension or a promise of every length.

• Multi-Cable Spacer Assemblies — start here when one component organizes several cable rows. State the number of rows, their centres and the way each cable passes or fastens.

Define the Spacer’s Exact Job

Row-position support

The spacer can keep a repeated pattern of cable rows between posts. It should be detailed against the project’s intended row positions and cable path. The spacer does not by itself establish an allowable opening, post spacing or guard compliance.

Intermediate restraint

Some layouts use an intermediate component to limit visible cable movement or keep cables from spreading between posts. The complete frame, cable tension, terminal design and project requirements still govern system behaviour. Do not turn the category name into an unverified performance claim.

Stair or sloped layout

On stairs, horizontal row spacing on an elevation is not the same as the spacing measured along the sloped member. Provide the stair pitch, spacer orientation and hole or attachment coordinates so the proposed component follows the actual cable axes.

Pass-Through, Captured or Attached Cable

The drawing should show how each cable meets the spacer. A cable may pass through a finished opening, be held by a separate insert, or attach with a defined fitting. Each approach changes the hole or fitting geometry, assembly sequence, replacement access and visible finish. Ask the quotation to identify the proposed method rather than assuming the same detail for every spacer route.

If the cable passes through a hole, confirm the finished edge or insert, cable diameter, approach angle and whether the cable moves during tensioning. If the cable is captured or attached, confirm the small parts, fastener access and how the row position is locked.

Coordinate the Spacer with the Rest of the System

• Tensionadores e esticadores set or adjust the cable; the spacer does not replace them.

• Conexões de extremidade de cabo terminate the run; the spacer is an intermediate component.

• Hardware de poste passante handles cable passages in structural posts; a slender spacer bar should not be assumed to carry the same responsibility as a post.

• Terminal and intermediate posts, top rail, bases and anchors remain part of the complete railing frame and must be coordinated separately.

Information to Send for a Spacer Inquiry

• elevation or sketch with structural-post positions and each proposed spacer location;

• number of cable rows and centre position of every row;

• cable diameter and construction;

• overall spacer length, end clearances and orientation;

• straight, stair or other sloped cable direction;

• pass-through, captured or attached cable detail;

• spacer attachment at top, bottom or another support;

• requested adjustment, if any, and how it should be locked;

• exposure, proposed material grade, finish, quantity and destination.

Quotation Fields to Compare

• overall geometry and row coordinates;

• cable passage or attachment detail and included inserts or fasteners;

• attachment to the surrounding railing and required access;

• any adjustable feature, range and locking method;

• proposed material grade and finish, with requested evidence;

• included components, exclusions, packing unit and quantity basis.

The main visual is a selection diagram, not a product photograph. Require the proposed spacer drawing or sample to identify the actual form, cable passages and fixing detail before ordering.

Send Your Cable-Row Layout on WhatsApp

Posts relacionados:

Projetos da Esang

Certificado da Esang

A Foshan ESANG Metal Products orgulhosamente mantém Certificação CE (Nº de verificação TD32772401) de acordo com a Diretiva de Produtos de Construção (Regulamento nº 305/2011), afirmando nosso compromisso com os mais altos padrões europeus de segurança e qualidade.

Certificado Linha de produtos:
Nosso abrangente portfólio de acessórios para guarda-corpos, incluindo braçadeiras de vidro, tensionadores, suportes, suportes de parede, sapatas de base, acessórios para corrimão, ferragens para cabos e componentes para postes, atende a EN1906:2012 garantindo a integridade estrutural e a confiabilidade do desempenho em todas as instalações.

O que isso significa para seu projeto:

  • Conformidade regulatória total para os mercados europeu e internacional

  • Desempenho de segurança e durabilidade verificado de forma independente

  • Suporte de documentação para especificações arquitetônicas

  • Tranquilidade com a garantia de qualidade de terceiros

Certificação válida até 2027 | Relatório de teste: CE-FE24122001-CY

Projetos da Esang

Entre em contato conosco agora!